Puccini Anniversary Zero feedback Integrated Amplifier

£3,500.00
(No reviews yet) Write a Review
UPC:
Puccini Anniversary Amp
Weight:
40.00 LBS
Minimum Purchase:
1 unit
Maximum Purchase:
1 unit
Shipping:
Calculated at Checkout
Puccini Anniversary Zero feedback Integrated Amplifier

Puccini Anniversary Zero feedback Integrated Amplifier

By Audio Analogue

Now available on demo in our Kent branch, contact branch to arrange an appointment.

Available in black or silver

 
Technical description
Heavy metal chassis, aluminum front panel with 14mm thickness, remote control. Volume control with an encoder that communicates with the four digital high precision Analog Devices potentiometers(two per channel). Volume with four possible curves selectable according to the sensitivity of the speakers. Indications of volume level and selected input, thanks white LEDs with brightness adjustable on two levels, or switched off. Inputs with high-quality gold-plated RCA connectors with Teflon insulation, soldered directly to the input's board and activated via signal relays. All stages of the amplifier on separate boards. Printed circuit boards have golden copper footprints with double thikness compared to standard PCBs in order to increase the electrical conductivity. Fully dual-mono circuitry. Transformer power 700VA, six pairs of ON-Semiconductor power transistors (three per channel). All internal wiring with pure solid 7N OCC copper conductors, military standard resistors, audiograde polypropylene capacitors, copper binding posts gold plated.
Technical features
Channels
2
Input impedance
47KOhm
Power on 8Ω load
80W @ 1% THD + N
Power on 4Ω load
160W @ 1% THD + N
Power on 2Ω load
300W @ 1% THD + N
Sensitivity(8Ω output nominal power)
490mVRMS
Frequency Response(Att. 0dB, -3dB band)
80KHz
Output resistance(2Ω nominal power and 1kHz)
0.17Ω
Input Noise(Band limits 0Hz-80kHz/A-weighted)
=30µV/=10µV µV
SNR
=110 dB
Standby power consumption(230VAC)
0.7W
Dimensions(HxWxD)
120x445x390 mm
Weight
15.5 Kg