Vyger Krimion 1 Phonostage

£40,000.00
(No reviews yet) Write a Review
UPC:
Vyger Krimion 1 Phonostage
Weight:
100.00 LBS
Shipping:
Calculated at Checkout
Vyger Krimion 1 Phonostage

Vyger Krimion 1 Phonostage

 

Vyger, in collaboration with VYDA Laboratories is pleased to announce the beginning of the creation of electronics designed to fully satisfy the most demanding fans of hi-end. As everyone knows, a good design is not enough if it’s not accompanied by a lot of experimentation and listening to reference standard audio equipment to produce something that exceeds all that came before.

Accordingly, Vyger is pleased to announce the culmination of a groundbreaking project, featuring the essential contribution of Simetel s.p.a. laboratories (well known for its work in telecommunications and the military sector) and in collaboration with electrical engineer extraordinaire, Salvatore Moschetto. We take this opportunity to thank “La Sapienza” University of Rome for having made available a staff of physicists and mathematicians, as their cooperation and scientific work was essential. In particular, we have performed specific tests on impulsive signals with digital FFT instruments.

The first Vyger project consists of a solid-state phono stage that enhances the performance of Vyger’s turntables, famous throughout the world for their absolute performance that mark the state of the art for the listening experience.

The project is based on a dual-phono with batteries power supply. This device can be connected to two different tone arms simultaneously. The cabinet is made of aluminum alloy 6082, made with CNC process and finished with oxidation, the wall thickness is remarkable; the front panel has a thickness of 30 mm. The power supply uses two banks of 10 batteries with 60 volts for channel.

When you listen to this device, the power supply is completely disconnected from the network and switches on only when you stop listening, so the power that reaches the final stages is pure.

Power reserve is almost endless, with an autonomy of about 7 hours.

The phono stage itself uses special hyper-speed transistors, with low noise and high bandwidth that provide the tracking signal properly. The plate of the printed circuit is of a high thickness, with 120 microns of copper and a gold plating of 10 microns, the components are all MIL standards and the circuits adopt very complex signal strategies.

The resulting sound is perfect, the dynamic of the sound seems limitless and the tonal consistency, in our opinion, is startlingly accurate.

We hope you will appreciate and enjoy this equipment which undoubtedly will transform your listening experience by conveying the glory of music and liberating our most cherished emotions.

 

Dual-phono stages M.C. or M.M selectable for each input
M.C. imputs:
Input resistance adjustable between 7Ω and 10kW
Selectable capacity 1nF / 10nF
M. M. imputs:
Adjustable input resistance between 47kΩ / 68kΩ
Capacity adjustable from 0 to 752pF.
Balanced outputs and single ended
output impedance of <25Ω
Nominal gain MC: 66dB (single ended) / 72 dB (balanced)
Nominal gain MM: 41dB (single ended) / 47dB (balanced)
Ability to adjust the gain from -4dB to + 6dB in steps of 2 dB.
Dynamic output: 40Vpp single ended outputs, 80Vpp on balanced outputs.
S / N ratio: dependent on the gain set:
> 70dB weighted inputs M.C. (referred to Vout = 1Veff).
Distortion: <0.1% * @ 1Veff
-3dB Bandwidth: 2 Hz … .600kHz (RIAA) / 20Hz … .600kHz (RIAA / IEC) selectable.
Autonomy 8h of battery operation, with notice of ~ 2h low battery.
Charging time with discharged batteries: 8h