Lector DigiCode S192 USB DAC
The new Digicode S-192 digital tube D to A converter is based on R2R the hi performances DAC from BB PCM1704.
Output circuits is design around vacuum tube type miniwatt as ECC-81/12AT7.
Balanced analog output circuit as real design with four dac and four analog stages.
Digital signals are accepted up to 192 kHz 24-bit on all inputs, asyncronuous USB input too support ASIO.
The Digicode S-192 is also equipped with word clock input and digital spdif output for general purpose application.
Proprietary input digital circuit for spdif reconstruction, all develop in Lector audio lab's: spdif circuit reconstruction ( S.C.R. by Lector strumenti audio, patent pending)
The display indicator supply right information about the real sampling frequency to the dac input, four digit display do not cut all the information.
USB fully compatible with Windows XP / vista/ 7 / 8 / 10 / 11 - MAC/OSX - LINUX
USB support ASIO / WASAPI / KS protocol
T h e d i g i t a l i n p u t s :
- Spdif IEC-958 as RCA connector @ resolution 192 Khz 24 bit
- Spdif IEC-958 as BNC connector @ resolution 192 Khz 24 bit
- AES-EBU AES-3 as XLR connector @ resolution 192 Khz 24 bit
- Opto toslink digital input @ resolution 192 Khz 24 bit
- Asyncronous USB PC/MAC input @ resolution 192 Khz 24 bit support stable KS / WASAPI / ASIO protocol at high speed comunication
( no any driver require for OSX-MAC, it's native input USB V-2 high speed)
- all inputs accept frequency from 32 - 44.1 - 48 - 88.2 - 96 - 176.4 - 192 Khz
O u t p u t / i n p u t d i g i t a l s e r v i c e s :
- Word Clock (W.C.) clock input
- Spdif as BNC output
A n a l o g o u t p u t :
- Unbalanced output as 2.5 volt 250 ohm
- Real balanced output as 2.5 volt 250 ohm
- with kit unbalanced is possible to have full 2 dac per channel
P e r f o r m a n c e s :
Input selector by sequential single shot by push button, led indicator for selected input.
Led indicator for analog and digital supply
Led lock for spdif / aes-ebu input
Separate power supply model PSU-DGC
Windows driver for XP/Vista/Seven/win8 at 32 and 64 bit supplied by CD rom, update service download from email contact request
No any driver required for OSX-Apple mac/ LINUX computer ( the USB interface is native)
Type of Unit
Digital to Analog converter with usb input
Output impedance
250 ohm
Jitter interface
20 ps
Frequency Response
15 - 96 kHz +/- 1 dB @ hi-res input 192 Khz
Input digital Impedance
75 ohm spdif / 110 ohm aes-3
Harmonic Distortion
THD < 0.1 %
S/N Ratio
100 dB ( A-weighted )
Tube output
ECC-81/12AT7 x 4
AC Main Voltages
100/110/230/240 VAC - 50/60 Hz - 100 VA
Dimensions ( W x D x H )
440 mm x 300 mm x 105 mm
Weight ( Net - Gross )
8 kg - 10 kg
For best AES-EBU interconnect recommend the DIGILINK Lector strumenti audio cables
You can also buy the Digi-Drive
Lector Digi-Drive CD Transport - £3325- 3400
